High Temperature Resistant White Bellows Straight Section PTFE Polytetrafluoroethylene Corrugated Hose

Product Description

High Performance Anti-Corrosive PTFE Hose

The pipe has changed the characteristics that the pipe can not be bent by special processing methods. It can be used to connect the lower graphite and ceramic glass pipes and can be used as the feeding and discharging pipe for tank trucks, tanks, containers, or reaction still. It can be used for pipe misalignment or to balance pipe displacements, dimensional changes caused by climate or other reasons, or to eliminate high-frequency mechanical vibrations. Can also be used on special occasions such as a tubular reactor or heat exchanger.

Specification

Product Parameters

Construction:    Tube: smooth bore PTFE
                            Cover: SS304 / SS316 Braided

The shape of hose: Smooth or corrugated

Temperature:  -65ºC to +260ºC

Coil length:   20m-100m (Random Length).

Standard:  SAE100 R14

Connector: JIC, NPT, BSP Fitting, flange etc.

Flat PTFE Hose

Corrugated PTFE Hose

The Model type  PTFE Hose is a smooth bore PTFE hose, available up to 1-1/4″ diameters. The diameters listed reflect nominal sizing.
It is lightweight, and handles a very broad range of chemicals at relatively high temperatures and pressures, and will not deteriorate in service. It is used in countless tough industrial applications where continual large bending is not required. Commonly provided with JIC, NPT or many other fittings.

The Model type PTFE Hose is a convoluted PTFE hose, available up to 4″ diameters.The convolutions provide a far tighter bend radius than most smooth bore alternatives.It is lightweight and handles a very broad range of chemicals at relatively high temperatures and pressures, including full vacuum.
It is used in countless tough industrial applications where a smooth bore is not required. Also available in conductive PTFE.
Commonly provided with JIC, NPT or many other fittings.

Advantages

Company Profile

Most PTFE hose manufacturers only use the naked eye for appearance control and simple measurement tools to control the size, the purpose of which is to save costs. However, it is impossible to rule out the trachoma and broken points in the PTFE hose, nor can it detect the technical problems that the F4 hose is not cooked or burnt in production. This quality product is very dangerous for conveying strong acids and bases. Our company uses professional testing equipment to control the quality of F4 hoses. Test the crystallinity of the F4 hose to confirm the softness of the product, the pressure burst tester tests the internal pressure resistance of the PTFE hose, and the air tightness tester detects the sand holes and break points in the hose.

Related Products

Stainless steel wire braided PTFE flat hose

Stainless steel wire braided PTFE corrugated hose

FAQ

We need to know the following information to give you our best quotation for hose:
A: Size range
B: Working pressure of the hose.
C: Shape of hose: Flat or corrugated?
D: Do you need fitting? if yes, please send us a technical drawing picture and material of fitting.
E: Length
F: Quantity